GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
Preparation
- 39 -
To Save User Settings
1. Stop image acquisition.
2. Expand
UserSetControl
and select the save destination (UserSet1 to UserSet3) in
UserSetSelector.
Note:
The factory default setting values are stored in Default and cannot be overwritten.
Caution:
Settings can only be saved when image acquisition on the camera is stopped.
3. Select
UserSetSave
and click the
UserSetSave
button.
4. The current setting values are saved as user settings.
