GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
Parts Identification
- 16 -
②
RJ-45 Connector
Connect a Gigabit Ethernet compatible LAN cable (Category 5e or higher, Category 6 recommended)
here.
GigE Vision Interface
Pin No.
Input/Output
Signal
1
In/Out
MX1+ (DA+)
2
In/Out
MX1– (DA–)
3
In/Out
MX2+ (DB+)
4
In/Out
MX3+ (DC+)
5
In/Out
MX3– (DC–)
6
In/Out
MX2– (DB–)
7
In/Out
MX4+ (DD+)
8
In/Out
MX4– (DD–)
③
POWER/TRIG LED
Indicates the power or trigger input status.
LED
Status
Lit amber
Camera initializing
Lit green
Camera in operation
Blinking
green
During operation in trigger mode, trigger signals are being input.
Note:
The blinking interval is not related to the actual input interval of the external
trigger.
