GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)
Preparation
- 37 -
Adjusting the White Balance
Adjust the white balance using R and B gain. The white balance can also be adjusted automatically.
Note:
The White Balance function is supported only on the color models.
Manual White Balance Adjustment
1. Expand
Analog Control
, and set
Balance White Auto
to
Off
. (Off is the default setting.)
2. Select the gain to configure in
Gain Selector
, and set the gain value in
Gain
.
Automatic White Balance Adjustment
1. Place a white sheet of paper or similar object under the same lighting conditions as the intended
subject, and zoom in to capture the white.
White objects near the subject, such as a white cloth or wall, can also be used.
2. Select the
Balance White Auto
tab, and click
Continuous
or
Once
depending on your intended
application.
The white balance is automatically adjusted.
