GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0)
Preparation
- 19 -
①
Lens
C-mount lenses with lens mount protrusions of 10 mm or less can be attached.
To prevent vignetting and to obtain the optimal resolution, use a lens that will cover the image sensor
size.
Image Sensor
Mono
Type 1
12.8mm x 10.24mm (16.392mm diagonal)
Cautions
:
l
The maximum performance of the camera may not be realized depending on the lens.
l
Attaching a lens with a mount protrusion of 10 mm or longer may damage the lens or
camera.
Notes:
The following formula can be used to estimate the focal length.
Focal length = WD / (1 + W/w)
WD: Working distance (distance between lens and object)
W: Width of object
w: Width of sensor
②
Direct Mounting (or Use MP-43 Tripod Adapter Plate)
When mounting the camera directly to a wall or other device, use screws that match the camera
locking screw holes on the camera (M3: depth 3mm).
Use the supplied screws to attach the tripod adapter plate (lower mounting holes).
Caution:
For heavy lenses, be sure to support the lens itself. Do not use configurations in which
its weight is supported by the camera.
