GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0)
Main Functions
- 77 -
Blemish Compensation
This camera has a blemish compensation circuit. This function compensates blemishes on the CMOS
sensor (typically pixels with extremely high response or extremely low response). Pixels that fulfill the
blemish criteria can be compensated by averaging the data from the pixel in the left adjacent column.
The number of pixels that can be compensated is up to 256 pixels.
This camera has automatic blemish detection function. After setting the threshold, and then the
blemish compensation is executed, blemishes are automatically detected and stored in the memory
inside the camera. If the blemish compensation is set to ON, the stored data is loaded. The customer
can adjust white blemishes but not black blemishes.
ALC (Automatic Level Control)
On this camera, auto gain and auto exposure can be combined to provide a wide ranging automatic
exposure control from dark to bright or vice versa. The functions are applied in the sequence shown
below and if one function is disabled, the remaining function will work independently.
l
If the lighting condition is changed from bright to dark ASC ― AGC
l
If the lighting condition is changed from dark to bright AGC ― ASC
ALC Reference will determine the target video level for AGC and Auto Shutter. For instance, if ALC
Reference is set to 100% video level, AGC and Auto Shutter will function to maintain 100% video level.
Please note that ALC function is available only in continuous mode, as well as RCT mode.
