Setting range
Default value
Description
Configure JAI ALC settings. These settings are
also used for AGC (auto gain control).
10 to 95
50
Set the target level for ALC. (unit: %)
ー
Low Right
Select the area for which to configure [ALC Area
Enable].
[Setting Range]
Low Right, Low Mid-Right, Low Mid-Left, Low Left,
Mid-Low Right, Mid-Low Mid-Right, Mid-Low Mid-Left,
Mid-Low Left, Mid-High Right, Mid-High Mid-Right,
Mid-High Mid-Left, Mid-High Left, High Right,
High Mid-Right, High Mid-Left, High Left
ALCAreaEnable
True, False
True
Enable/disable the photometry area selected in
[ALC Area Selector].
True, False
True
On:
Operate ALC with all areas designated as
photometry areas, regardless of the individual
enabled/disabled photometry area states configured in
[ALC Area Selector].
Off:
Operate ALC according to the
individual enabled/disabled photometry area states
configured in [ALC Area Selector].
100 to 7999811
100
Set the minimum value for the Exposure Auto
(ASC) control range.
101 to 7999812
43864
Set the maximum value for the Exposure Auto
(ASC) control range.
100 to 1599
100
Set the minimum value for the Gain Auto (ASC)
control range.
101 to 1600
1600
Set the maximum value for the Gain Auto (ASC)
control range.
1 to 8
4
Set the reaction speed for AGC/ASC.
(8 is the fastest.)
ー
Idle
Display the status of ALC.
[Setting Range]
Executing ASC, Executing AGC,
Executing ASC and AGC, Executing AWB,
Executing ASC and AWB, Executing AGC and AWB,
Executing ASC and AGC and AWB, Convergent, Idle
Setting range
Default value
Description
Configure settings for JAI white blemish correction.
True, False
True
Enable/disable blemish correction.
ー
ー
Execute blemish detection.
0 to 100
10
Set the blemish detection threshold.
0 to 255
0
Select the index for the target blemish coordinates
(BlemishDataPosition X/Y).
Blemish Compensation PositionX
-1 to 2463
-1
Display the X coordinate (horizontal pixel position) of
the target blemish selected in
[BlemishCompensationIndex].
You can also manually enter the X coordinate of the
blemish you want to correct.
Blemish Compensation PositionY
-1 to 2055
-1
Display the Y coordinate (vertical pixel position) of the
target blemish selected in
[BlemishCompensationIndex].
You can also manually enter the Y coordinate of the
blemish you want to correct.
ー
0
Display the number of target blemishes.
Item
ASC Min
ASC Max
AGC Min
AGC Max
AGC/ASC ControlSpeed
ALC Status
Item
k)JAICustomControlALC
ALCReference
ALCAreaSelector
ALCAreaEnableAll
l) JAI Custom Control Blemish
Blemish Compensation Number
Blemish Compensation Index
Blemish Detect Threshold
Blemish Detect
Blemish Enable
—
52
—
GO-5100MP-PGE