User Manual (Ver. 1.0) - Main Functions
GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
- 39 -
Burst Trigger Mode
Related Setting Items:
In Burst Trigger mode, when a single external trigger signal is received, the camera acquires images
continuously at high speed, stores the images in the internal memory temporarily, and then the image
data is read out. Data readout is limited to GigE Vision's readout speed (up to 1 Gbps).
You can use BurstTrigger mode when:
l
One or both of the following trigger modes is enabled:
l
ExposureMode
is set to
Timed
, and
FrameStartTrigger
is set to
On
l
TriggerMode[AcquisitionStart]
=
On
l
GainAuto
,
ExposureAuto
,
BalancewhiteAuto
are sett to
Off
Notes:
l
If
BurstTrigger
[ExposureModeOption] is set to
On
from
Off
or
RCT
, GainAuto,
ExposureAuto and BalanceWhiteAuto will be forced
Off
.
l
When in Burst Trigger mode,
PerformShadingCalibration
,
GainAuto
,
ExposureAuto
,
and
BalanceWhteAuto
cannot be controlled.
Max Frame Rate for Burst Trigger Mode
The maximum frame rate value for BurstTrigger mode is the maximum frame memory write speed (up
to 6 Gbps) or the sensor maximum frame rate, whichever is slower.
