— 40 —
Binning Function
SP-45000M-CXP4 only
The binning function allows you to combine the signal values of clusters of adjacent pixels
to create improved virtual pixels. Using the function results in images with lower pixel
resolution and higher sensitivity.
Horizontal Binning performs addition or averaging digitally.
Vertical Binning performs addition within the image sensor.
SP-45000M-CXP4/SP-45000C-CXP4
Shading
Image Format
Control
■
ColorShading (SP-45000C-CXP4 only)
R-channel and B-channel properties are adjusted to using the G-channel shading
properties as a reference.
• For FlatShading and ColorShading, the maximum amount of correction gain
for all pixels is limited to 8 times the amount of gain before correction. (The
amount of gain cannot be increased to more than 8 times the amount of gain
from before correction.)
• If the area in the screen with the highest brightness level is 175 LSB or less
(during 10-bit video output), proper correction is not possible.
Caution
■
To use the shading correction function
Configure the settings as follows.
Display a white chart under a uniform light, and execute [PerformShadingCalibration].
After shading correction is executed, the shading correction value is automatically
saved to the user area selected in [ShadingMode].
Pre-correction
Post-correction
Item
Setting value
Description
ShadingCorrectionMode
FlatShading, ColorShading
Select the shading correction mode.
ShadingMode
User1, User2, User3, Off
Select the user area to which to save the
shading correction value.
Note