CXP Link Sharing function
TransportLayer
Control
This function has two operation modes (Sharing mode and Duplicate mode).
■Sharing mode
This camera can be connected to multiple PCs and the captured images can be divided
and sent to each PC.
①
②
③
④
■ To Use Sharing mode
1. Set [CxpLinkSharingEnable] of [TransportLayerControl] to True.
2. Set the number of divisions of the captured image in the horizontal direction with
[CxpLinkSharingHorizontalStripeCount]. In the case of the above figure, 2 is set.
Set the number of divisions of the captured image in the vertical direction with
[CxpLinkSharingVerticalStripeCount]. In the case of the above figure, 2 is set.
3. It is possible to overlap the divided images of ①, ②, ③, and ④. The amount of
overlap can be 0 pixels/lines (no overlap), 64 pixels/lines, or 128 pixels/lines.
The amount can be set independently in the horizontal and/or vertical directions.
Horizontal : [CxpLinkSharingHorizontalOverlap]
Vertical : [CxpLinkSharingVerticalOverlap]
4. It is necessary to restart this camera and tools after setting.
(Each setting (CxpLinkXXX) is automatically saved when the setting is changed.)
It is also possible to divide the captured image shown below.
[CxpLinkSharingHorizontalStripeCount] = 4
[CxpLinkSharingVerticalStripeCount] = 1
[CxpLinkSharingHorizontalStripeCount] = 1
[CxpLinkSharingVerticalStripeCount] = 4
It is also possible to divide the captured image into two and send them when connecting
to two PCs.
[LINK-1] CXP Master connection (LinkSharing Status: Master)
[LINK-2] CXP Master connection (LinkSharing Status: Slave)
[LINK-3] CXP Master connection (LinkSharing Status: Slave)
[LINK-4] CXP Master connection (LinkSharing Status: Slave)
[LINK-1] CXP Master connection (LinkSharing Status: Master)
[LINK-2] CXP Master connection (LinkSharing Status: Slave)
SP-45000M-CXP4A/SP-45000C-CXP4A
- 48 -
