Setting range
Default value
Description
Configure image format settings.
8192
8192
Display the maximum image width.
5460
5460
Display the maximum image height.
8192
8192
Display the maximum image width.
5460
5460
Display the maximum image height.
128～8192 step 128
8192
Set the image width.
8～5460 step 4
4096
Set the image height.
0～8064 step 128
0
Set the horizontal offset.
0～5452 step 4
0
Set the vertical offset.
Average, Sum
Sum
Set the mode for horizontal binning.
1,2
1
Set the number of pixels in the horizontal direction for which to perform
binning.
Sum
Sum
Set the mode for vertical binning. (Sum fixed)
1,2
1
Set the number of pixels in the vertical direction for which to perform
binning.
0,1
0
To reverse the image horizontally, set [ReverseX] to True.
In SP-45000C-CXP4A, the PixelFormat that can be set differs depending on
the ReverseX and ReverseY settings.
ReverseX : 0 (False) ReverseY : 0 (False) -> BayerRG
ReverseX : 0 (False) ReverseY : 1 (True) -> BayerGB
ReverseX : 1 (True) ReverseY : 0 (False) -> BayerGR
ReverseX : 1 (True) ReverseY : 1 (True) -> BayerBG
0,1
0
To reverse the image vertically, set [ReverseY] to True.
In SP-45000C-CXP4A, the PixelFormat that can be set differs depending on
the ReverseX and ReverseY settings. Please refer to [ReverseX].
ー
SP-45000C-CXP4A :
BayerRG8
SP-45000M-CXP4A :
Mono8
Set the pixel format.
In SP-45000C-CXP4A, the PixelFormat that can be set differs depending on
the ReverseX settings.
[Setting range]
[SP-45000C-CXP4A]
ReverseX : 0 (False) ReverseY : 0 (False)
0x01080009:BayerRG8, 0x0110000D:BayerRG10,
0x01100011:BayerRG12, 0x0110010A:BayerRG14
ReverseX : 0 (False) ReverseY : 1 (True)
0x0108000A:BayerGB8, 0x0110000E:BayerGB10,
0x01100012:BayerGB12, 0x0110010B:BayerGB14
ReverseX : 1 (True) ReverseY : 0 (False)
0x01080008:BayerGR8, 0x0110000C:BayerGR10,
0x01100010:BayerGR12, 0x01100109:BayerGR14
ReverseX : 1 (True) ReverseY : 1 (Truee)
0x0108000B:BayerBG8, 0x0110000F:BayerBG10,
0x01100013:BayerBG12, 0x0110010C:BayerBG14
[SP-45000M-CXP4A]
0x01080001:Mono8, 0x01100003:Mono10,
0x01100005:Mono12
ー
Off
Select the test image.
[Setting range]
0:Off
1:GreyHorizontalRamp
2:GreyVerticalRamp
3:GreyHorizontalRampMoving
SP-45000C-CXP4A only
4:HorizontalColorBar
5:VerticalColorBar
0:Off
1:MultiRoiAreaMode
2:ALCAreaMode
3:AWBAreaMode
0:Off
You can check the target area by reducing the brightness of the non-target
area to 50%.
MultiRoiAreaMode : Check the active area on MultiROI.
ALCAreaMode: Check the photometry area on ALC.
AWBAreaMode: Check the photometry area on AWB.
Configure settings for Multi ROI.
0: Off,
1: On
Off
Enable/disable Multi Roi.
0 ～ 7
Select the index for the Multi Roi mode.
MultiRoiWidth
ー
ー
Set the width for the selected Multi Roi index.
MultiRoiHeight
ー
ー
Set the height for the selected Multi Roi index.
MultiRoiOffsetX
ー
ー
Set the horizontal offset for the selected Multi Roi index.
MultiRoiOffsetY
ー
ー
Set the vertical offset for the selected Multi Roi index.
1 ～ 8
ー
Set the maximum number of valid horizontal index numbers.
1 ～ 8
ー
Set the maximum number of valid vertical index numbers.
OverlayMode
BinningVertical
ReverseY
SensorWidth
SensorHeight
WidthMax
HeightMax
Width
BinningHorizontalMode
ReverseX
ImageFormatControl
Item
BinningHorizontal
TestPattern
PixelFormat
BinningVerticalMode
OffsetY
OffsetX
Height
MultiROIControl
MultiRoiVerticalEnableNumber
MultiRoiIndex
MultiRoiMode
MultiRoiHorizontalEnableNumber
SP-45000M-CXP4A/SP-45000C-CXP4A
- 60 -
