SW-4010Q-MCL-M52 User Manual (Tentative)
Miscellaneous
- 100 -
Specifications
Item
RGB
SWIR
Image Sensor
4K line scan CMOS image sensor × 3
Effective Pixels: 4096 pixels × 3 (R, G, B)
Pixel Size:7.5 μm x 7.5 μm
1K line scan InGaAs linear image sensor x 1
Effective Pixels: 1024 pixels
Pixel Size:25.0 μm x 25.0 μm
Camera Link Clock
42.5 / 65 / 85 MHz
Line Rate
4K: 500 ~ 20.5kHz
2K: 500 ~ 40.8kHz
500 ~ 39.2kHz
Conversion Efficiency
280nV/e
Video S/N ratio
>55 dB (Gain = 0dB) @10bit
>50 dB (Gain = 0dB) @10bit
PRNU
Post-correction: within ±1% (during 100% output) Post-correction: within ± 5% (during 100% output)
DSNU
Post-correction: within ±5% (during 0% output)
Post-correction: within ± 5% (during 0% output)
Gain
Analog
AnalogBaseGain: 0dB, 6dB, 12dB
Digital
IndividualGainMode = Off
- Digital All: x1.0 ~ x32.0
- DigitalRed/DigitalBlue:x0.4 ~ x4
IndividualGainMode = ON
- DigitalGreen/DigitalRed/DigitalBlue: x1.0 ~
x64.0
Analog
AnalogBaseGain: -6dB, -3db, 0dB, +3dB
AnalogAll: x1 ~ x3.572
Black Level (User Settings)
Manual
All: -133 ~ +255 (LSB@12bit)
Red: -64 ~ +64
Blue: -64 ~ +64
Default Setting: Output black level at 0 (33LSB
during 10-bit)
Manual
All: -256 ~ +255 (LSB@12bit)
Default Setting: Output black level at 0
Image Output
Digital Video Output (Camera Link Connector 1):
RGB8 (Default), RGB10BasePacked*,
RGB12BasePacked*
Note:
*Customized pixel format. To view image
output in this format, a viewer that supports these
formats is required.
Digital Video Output (Camera Link Connector 2):
Mono8 (Default), Mono10, Mono12