SW-4010Q-MCL-M52 User Manual (Tentative)
Main Functions
- 45 -
4. When
ImageScalingMode
is set to
On
, specify the scaling using
ImageScalingHorizontalRaw
. For example, if you want to reduce the output image by
50%, set ImageScalingHorizontalRaw to 2048.
Note:
ImageScalingHorizontalRaw cannot be configured when ImageScalingMode is
set to
SWIRPixelMode
or
SWIRHalfPixelMode
.
5. Configure the RGB channels' WidthMax when
ImageScalingMode
is
On
or in
SWIRPixelMode
/
SWIRHalfPixelMode
. The WidthMax value can be reduced while
maintaining the center of the image. The user-configured Width and OffsetX values must be
controlled within this ImageScalingWidthMax range.
SWIRPixelMode and SWIRHalfPixelMode
The SWIRPixelMode and SWIRHalfPixelMode options configure the RGB channels' PixelSize
and Width settings to match the SWIR channel's PixelSize and Width settings, by automatically
setting ImageScalingHorizontal and ImageScalingWidthMax.
ImageScalingMode
ImageScalingHorizontal
PixelSize
Width / ImageScalingWidthMax
Off
1
7.5um
Width: 4096
SWIRPixelMode
0.3
25um
ImageScalingWidthMax: 1024
SWIRHalfPixelMode
0.6
12.5um
ImageScalingWidthMax: 2048
These options set the horizontal scaling ratio (ImageScalingHorizontal) to 0.3 or 0.6 to scale the
PixelSize, and then cut off the ROI from the left and right edges equally to set
ImageScalingWidthMax to 1024 or 2048. This way, the center of the image is aligned with the
center of the original object.
