SW-4010Q-MCL-M52 User Manual (Tentative)
Setting List
- 72 -
ImageFormatControl
Configure image format settings for the RGB channels.
Image Format Control Item
Setting
Range
Default
Value
Description
WidthMax
-
4096
Display the maximum image width.
Default: 4096
ImageScalingMode = Off :
- BinningHorizontal=1: 4096, BinningHorizontal=2: 2048
ImageScalingMode = other than Off:
- WidthMax = ImageScalingWidthMax
Width
-
4096
Set the image width.
Max: WidthMax - OffsetX
Min,Step:
- Normal: 16
- BinningHorizontal=2: 8
- ImageScalingMode =On: 8
Height
-
1
Display the image height.
OffsetX
0 ~ WidthMax
- Width
0
Set the horizontal offset.
Max: WidthMax - Width
Step: 16 (8)
Note:
When BinningHorizontal = 2 or ImageScalingMode enabled,
the value in parentheses is applicable.
BinningHorizontalMode
0:Sum
1:Average
0:Sum
Set the processing method for horizontal binning.
Note:
Refer to the blog post on how to use the binning function:
https://news.jai.com/blog/pixel-binning
BinningHorizontal
1 ~ 2
1
Set the number of pixels in the horizontal direction for which to
perform binning.
BinningVerticalMode
0:Sum (Fixed) 0:Sum
Display the processing method for vertical binning.
BinningVertical
1 ~ 2
1
Set the number of pixels in the vertical direction for which to
perform binning.
ImageScalingMode
Related Topic:
-
0:Off
Enable ImageScalingMode.
0:Off
1: On
2: SWIRPixelMode
3: SWIRHalfPixelMode
ImageScalingSumMode
0:Off (Ave)
1:On (Sum)
0:Off (Ave)
Select whether to use Sum or Average mode when
ImageScalingMode is enabled.
