SW-4010Q-MCL-M52 User Manual (Tentative)
Setting List
- 76 -
AnalogControl
Configure the analog control settings for the RGB channels.
Analog Control Item
Setting Range
Default
Value
Description
IndividualGainMode
Related Topic:
0:Off
1:On
0:Off
In IndividualGainMode, RGB can be configured individually for the entire
gain adjustment range of the sensor.
GainSelector
-
0:Digital
All
Select the gain to configure.
0:Digital All (IndividualGainMode=OFF only)
1:Digital Green (IndividualGainMode=ON only)
2:Digital Red
3:Digital Blue
Gain
-
1
Set the gain value for the gain setting selected in GainSelector (Step =
0.01).
IndividualGainMode=OFF
Digital All
: Min=1.0, Max=32.0
DigitalRed/DigitalBlue
: Min=0.4, Max=4.0
IndividualGainMode=ON
: Min=1.0, Max=64.0
GainAuto
0: Off
1: Once
0: Off
Enable/disable gain auto adjustment.
When set to
Once
, the automatic adjustment will be performed only once,
and then automatically switched to
Off
.
AGCReference
30 ~ 95
50
Set the target level for AGC. (Unit: %)
AGCOnceStatus
-
-
Display the status when GainAuto is set to Once.
1: Succeeded.
2: Error1- Timeout-error occurred.
3: Abort1-Contro lLimit
4: IDLE (Default)
AnalogBaseGainSelector
1:Analog Green
2:Analog Red
3:Analog Blue
1:Analog
Green
Select the analog base gain to configure.
AnalogBaseGain
0:0dB
1:6dB
2:12dB
0:0dB
Set the gain value for the analog base gain item selected in
AnalogBaseGainSelector
.
