SW-4010Q-MCL-M52 User Manual (Tentative)
Usage Precautions
- 9 -
Usage Precautions
Notes on Cable Configurations
The presence of lighting equipment and television receivers nearby may result in video noise. In
such cases, change the cable configurations or placement.
Notes on Attaching the Lens
How to Clean a Sensor
Avoiding Dust Particles
When attaching the lens to the camera, stray dust and other particles may adhere to the sensor
surface and rear surface of the lens. Be careful of the following when attaching the lens.
l
Work in a clean environment.
l
Do not remove the caps from the camera and lens until immediately before you attach the
lens.
l
To prevent dust from adhering to surfaces, point the camera and lens downward and do not
allow the lens surface to come into contact with your hands or other objects.
l
Always use a blower brush to remove any dust that adheres.
l
Never use your hands or cloth, blow with your mouth, or use other methods to remove dust.
Notes on Camera Link Cable Connections
Secure the locking screws on the connector manually,
and do not use a driver. Do not secure the screws too
tightly. Doing so may wear down the screw threads on the
camera. (Tightening torque: 0.15 N·m or less)
Caution:
Secure manually. Do not secure too tightly.
