Xonic
®
100 Series
Jain Technology
Tel. 82-2-856-4114 Fax. 82-2-856-9503
18
Step 5:
Setup DNW
Caution) Make sure
NOT
to turn on flowmeter’s power at this step
➢
Run the Software (DNW.exe) and click “Configuration”.
➢
User will see the window of “UART/USB Options” as below.
➢
Set the Baud Rate at “115200” and the COM Port that user just set.
➢
After return to DNW, open the “Serial Port” menu and click “Connect”
➢
After Connecting, user will see the information which just been setup and
shows on the top of the window as figure.
Summary of Contents for Xonic 100 Series
