1
DESCRIPTION
1.1
PURPOSE
The machine is used to propel air out of a tube to move
unwanted materials such as leaves in the yard. Some
machines also suck in leaves and small twigs through a
vacuum, and shred them into a bag.
1.2
OVERVIEW
Figure 1 - 4
1
Trigger
2
Rear tube
3
Front tube
4
Groove
5
Tab
6
Hole
7
Tab
2
INTRODUCTION
Your product has been engineered and manufactured to high
standards for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of
rugged, trouble-free performance.
2.1
RESIDUAL RISKS
Even when using the power tool properly, remaining risks
may exist. The following hazards may occur based on the
construction of the equipment:
•
Lung damage when not wearing a suitable protective
mask.
•
Hearing damage when not wearing suitable ear
protection.
•
Hand/arm damage due to vibration when you use the
equipment for extended periods, or the machine is not
properly operated and maintained.
3
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your battery-
operated (cordless) power tool.
3.1 TRAINING
• Read the instructions carefully.
Be familiar with the controls
and the correct use of the
machine.
• Never allow children, persons
with reduced physical, sensory
or mental capabilities or lack
of experience and knowledge
or people unfamiliar with these
instructions to use the
machine. Local regulations can
restrict the age of the operator.
• Keep in mind that the operator
or user is responsible for
accidents or hazards occurring
to other people or their
property.
3.2 PREPARATION
• While operating the power tool
always wear substantial
footwear and long trousers. Do
not operate the power tool
when barefoot or wearing open
sandals. Avoid wearing
clothing that is loose fitting or
that has hanging cords or ties.
• Thoroughly inspect the area
where the power tool is to be
used and remove all objects
which can be thrown by the
power tool.
• Before using, always visually
inspect to see, that fasteners
2
English
EN
