are secure, the housing is
undamaged and that guards are
in place.
• Never operate the machine
while people, especially
children, or pets are nearby.
• Obtain ear protection and
safety glasses. Wear them at all
times while operating the
machine.
3.3 MAINTENANCE
• Keep all nuts, bolts and screws
tight to be sure the power tool
is in safe working condition.
• Always allow the power tool
to cool down before storing.
• Maintain the machine with
care and keep it clean. Do not
to touch moving hazardous
parts until the battery is
removed and the moving
hazardous parts have come to a
complete stop.
• Allow the machine to cool
before making any inspections,
adjustments, storing etc.
• Replace worn or damaged
parts for safety. Use only
genuine replacement parts and
accessories.
4
BLOWER SAFETY
WARNINGS
• Operate the appliance only in
daylight or in good artificial
light.
• Keep all cooling air inlets clear
of debris.
• Never blow debris in the
direction of bystanders.
• Before starting the machine,
make certain that the tube inlet
is empty.
• Keep your face and body away
from the air intake opening.
• Do not allow hands or any
other part of the body or
clothing inside the tube inlet,
discharge chute, or near any
moving part.
• Inspect unit to ensure no
foreign material/ debris is in
the machine prior to operation.
• Never operate the machine
with defective guards or
shields, or without safety
devices or if the cord is
damaged or worn.
• Do not overreach. Keep
balance at all times, and
always be sure of the footing
on slopes. Walk, never run.
3
English
EN
