14
Disable robot
：
When robot enabled, short press the lock enable
button
Start/
Stop
Run program:
press the terminate button to start the default loaded
program. After robot moves to the initial position of the program, execute the
default program .
Terminate program:
When program operating, short press the button to
terminate the program.
Home
Reset
：
After robot enabled, when no program is operating, press
continuously to control the robot to run to the set default position. When robot
moves to the default position, press continuously and the lock indicator light is
blue.
Pause/
Resume
Pause:
When the robot moving automatically, press to pause the program.
Recovery:
When robot paused, press to recover the program running.
Lock/Fn
Locking handle:
Press and hold the lock button for 3 seconds, and the
lock indicator light will be orange.
Unlock handle:
Press and hold the lock button for 3 seconds, and the lock
indicator light will go out.
Combination function:
Other buttons and lock button can be pressed in
combination.
Lock
indicator
Locked state:
When locked, the indicator is orange. Except for the unlock
and on/off button, other buttons are invalid. APP can control the robot.
Unlocked state:
When unlocked, the indicator is off and the handle can be
used. The APP interface is gray and you can not control the robot.
Emergency
Stop
For emergency stop.
Note: The emergency stop button is only used in emergency situations and
cannot be used as a general power-off device.
Note
：
After powering on, press any button and the handle will beep at a frequency of 2 times per second.
When using the handle to operate the robot, please ensure that the robot under operating is within the line
of sight, and follow the relevant safety rules to prevent injury to the people or equipment around the robot.
JAKAZu 5
