Page 3 of 11
Assembly Instructions: Multi Section Cupboard
PLACE FIXINGS
2. All the remaining Box Sides use White Cams instead, as they will be hidden. Place the White Cams
in all the available holes, facing outwards. Attach the Adjustable Feet using the Foot Plate and 20mm
PAN Screws for each assembly. However, you should pilot drill these first to avoid splitting
the wood. The Adjustable Foot should be set to about 25mm.
(Outer) Box Side
(Inner) Box Side
Front Edge
Nickel Cam
White Cam
20mm PAN Screw
Foot Plate
Adjustable Foot
Set to 25mm
25mm
Cam Bolt
1. Identify the two Box Sides that will be at each end of the finished
unit. Note these parts have blind tenon recesses and a rebate
along the rear edge
.
For each, place the Nickel Cams in
all the available holes, facing outwards. Using a
screwdriver, or power tool on a low setting,
screw the Cam Bolts into the
available 5mm holes.
