Page 7 of 11
Assembly Instructions: Multi Section Cupboard
9. Once the Shelves and the Box Base assembly are placed in the RH Side, the LH Side can be
located. Ensure that the Shelves with cams align with the Cam Bolts in the LH Side, and lock these
into place. Lock the cams in the Box Top and Box Base.
This should force the box square. Once all sides are fixed in place, continue to screw through the
remaining 3mm holes with 25mm WSH Screws to help secure the Shelves.
10. Place the Box
Back onto the assembly
with the engraving upwards and
towards the Box Top as shown. Slide
the Box Back over until the top edge aligns
perfectly with the Box Top. Fix this top edge with
the 25mm WSH Screws. Then fix down one side,
accurately realigning the edge to the Box Side as you go.
Fit 45mm CSK Screws through the 4mm holes
(in the RH Side) into the Box Top, Box Base
and Shelves with cams
Fix with 25mm
WSH Screws
Box Back
Box Top
