Page 8 of 11
Assembly Instructions: Multi Section Cupboard
11. Carefully stand the boxes up and
position them adjacent to each other in
the correct order. If they are too large to
do safely, you’ll need to enlist some help.
Ensure that they will not fall.
Adjust the feet height as necessary to bring
the boxes in line with each other.
Connect the boxes together with two pairs
of Connecting Screws, at the top and
bottom of each box. Check that the screws
engage properly before placing the larger
(female) part through the RH Side, and
then engage the screw from the LH Side.
You may need two large pozi/flathead
screwdrivers to fully engage the
Connecting Screws.
Fix with
Connecting Screws
Fix with
Connecting Screws
LH Upright
Mid Upright
RH Upright
NOW ASSEMBLE ALL THE OTHER BOXES
12. Fit the Uprights to the Sides by
aligning the cams and locking them into
place.
Ensure all the cams are fully open
before placing the Uprights.
To lock the Mid Upright cams, use a
pozi screwdriver via the access holes
on the Inner Box Sides
