page: 15 / 20
●
Person "2" ‒ if desired pitch angle is achieved,
tighten the screw "B".
B
●
After changing the pitch angle of the arms,the front profile requires the setting. Description of the
system below.
Note
In order to prevent an accumulation of water from the rain in the fabric (a water bag
forming), it is necessary to set by fully opened awning a pitch angel on more than 14 °.
Through the formation a water bag can cause damage to equipment and danger to
people. Awning is a product that is designed to protect against the sun. You can only
use it in light rain.
3.8.6. Front profile adjust
Note
If the pitch angle of the awning arms has changed must be readjust. Inappropriate
front profile settings can lead to structural damage or injuries.
●
Measure the length of the visible part of the
screw "C " in the arm bracket.
C
Screw „C“ on max
3,7 cm unscrew
●
Set the front profile according to table below:
Slit E
Screw „C“ unscrew to:
1 (upper)
3,7 ‒ 3,39 cm
2
3,39 ‒ 3,08 cm
3
3,08 ‒ 2,77 cm
4
2,77 ‒ 2,46 cm
5
2,46 ‒ 2,14 cm
6
2,14 ‒ 1,83 cm
7
1,83 ‒ 1,52 cm
8
1,52 ‒ 1,21 cm
9
1,21 cm ‒ 0,9 cm
10,11
not used
E (slit)
F (cog)
G (clamping screw)
●
to set in accordance with the table above.
