HEY THERE!
JUST CHARGE IT
WE’RE HERE TO HELP. CONTACT US!
HX-HP400
USER GUIDE AND
WARRANTY INFORMATION
You’ve got questions? We’ve got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-HP400)
Register your headphones! Information about where
you bought them and how you’re using them is like
gold for the people who make these headphones.
To register, visit:
USA:
www.jamaudio.com/customer-support/product-registration
CAN:
canada.jamaudio.com/product-registration
Charging the headphones is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge
them using your computer or a wall outlet. The Transit Lite needs about 2 hours for up to 11 hours of party time.
The LED light on your headphones lets
you know what they’re doing.
1. The cord that came with the headphones —
the one with the USB on one end and the micro
USB on the other — will work with your
computer.
2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a micro USB the
next time you’re at the store, or use any USB AC
adapter, including the one for your cell phone.
CONTROL YOUR DESTINY ... OR AT LEAST YOUR HEADPHONES
SHED SOME LIGHT
BLUETOOTH
®
CONNECTION — IT’S A SETUP
1. Turn the music up
2. Turn the music down
3. Skip back a track
4. Push it to play, push it again to pause.
Press and hold for 6 seconds to power on
5. Jam on to the next song
6. Shed some light on what your headphones
are doing (see chart to the right for details)
7. The power cord goes here
8. Aux-in port to hook it up old-school
Like any amazing couple, this one starts with a connection — one between your
device and the headphones’
Bluetooth
. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the head-
phones has
Bluetooth
.
2. Turn on the headphones (press and hold play/pause for 6 seconds) and look for
the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for Jam Transit Lite Headphones in your device’s
Bluetooth
list or click YES.
5. Now hit PLAY on your headphones and crank it up — or down if you’re lame.
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
or
2h
The device and
Bluetooth
will find each other every time, as long as
the headphones are set to
Bluetooth
and your device’s
Bluetooth
is,
you know, on.
If you’re connecting to a computer, you may have some extra steps
on that end. You’ll have to get that information from the computer
company.
Depending on your device, you may be prompted to enter a pairing
code. If prompted, enter “0000” as the code.
Note: If you turn on your Transit Lite Headphones but haven’t started
the party yet, they will automatically power off after 2 minutes of
unpaired inactivity.
6s
Thank you for purchasing
the
JAM Transit Lite
.
Check out the sections
below for all the
important information
about your new
headphones.
Pairing Mode
Connected
Charging
Ready to Party
Low Battery
Continued on page 2.
AC adapter not included.
3
5
2
1
4
6
7
8
JAM Transit Lite
Bluetooth
®
Devices
