1-4 System Connection – bi-amp configuration with 4 core cable
Amplifiers are pre-wired with the output for channel B on pin2+/- of channel A output, and also the output from channel D to pin2+/-
of channel C output. This is to allow bi-amp configuration without the need of a separate patch panel. Four core speaker cable
must be used, and the LF signal applied to input A, and the HF signal applied to input B. LF output will be on pin1+/- and should be
connected to the woofer inside the speaker. HF output will be on pin2+/- and should be connected to the tweeter inside the
speaker. The B8 speaker is specifically configured for this application, Channels A and C are high power channels, and channels B
and D are medium power, as typically the high frequencies require less power than the low frequencies. Output connectors B and
D are unused (NC = no connection)
