TRAX Apollyon Plus II User’s Manual
2-16
The top two lines of this
screen tell you the layout
selected and the how the
tubes should be arranged
for this study. The fourth
line tells you what the dead
time is set for (DT:35ms).
The top line of this screen
gives the date and time as
they are set in the TRAX
Apollyon Plus II. The next
three lines provide infor-
mation on the site code that
has been programmed for the study.
This screen shows the road
tube diagnostics (refer to
page 2-10), which allows
you to check the strength
of the pulses coming from
the tubes while the study is
being conducted. By using the screen, you can check to see if any
road tubes are starting to fail while you are still collecting data.
Volume Only Status Screens
The top line of this screen
tells you the way in which
the data is being collected
(CHNL CNTS, or Channel
Counts) and the current
interval number (Int:0001).
The next two lines give you
the total per channel for the current interval. The last line gives you
the time and date as they are programmed in the TRAX Apollyon
Plus II.
07:13:12 02/13/18
SITE CODE:
6003-2006
MAIN ST AT ELM ST
A:
B:
C:
D:
L6: Two Equal Tubes
with spacing; 2 dir
DT:35ms
Basic Data Status Screen #2
Basic Data Status Screen #3
Basic Data Status Screen #4
CHNL CNTS Int:0001
A:0006
B-A:0008
TD 07:19:50 02/13/18
Volume Only Status Screen #1
Summary of Contents for TRAX Apollyon Plus II
