14
65. Now the nose bar is glued. What is twisted now will stay like
this. With glueing the nose bar the wing will finally get its
stability. Before you start glueing, the wing needs to be fxed
to the building board.
66. Both wings are now sanded and are ready to be glued.
67. The wing bracket might have to be sanded and slided right in
the wing to fit the groove. It is efficient to use thin glue as
paste might not have enough room.
69. Der Randbogen wird 4 - 1/2 lagig aus 6 mm Balsa aufgebaut.
The tip is glued with 6 mm 4 - 1/2 layers.
68. The other side is now pushed in and both are glued with
epoxy or paste.
Tip:
Make sure to glued edge to edge.
70. Sand the edge.
