SPECIFICATIONS
Part
No.
Hose
Length
Hose
Material
Working
Pressure
Hose
I.D.
Hose
O.D.
Leader
Hose
Inlet
Size
58.3012
20 m
Extreme Ultraflex
Reinforced
Max. 300 p.s.i.
(20 BAR)
9.2 mm
15.2 mm
2 m
1/4” BSP
58.3023
30 m
Extreme Ultraflex
Reinforced
Max. 300 p.s.i.
(20 BAR)
9.2 mm
15.2 mm
2 m
1/4" BSP
58.3034
20 m
Extreme Ultraflex
Reinforced
Max. 150 p.s.i.
(10 BAR)
10.5 mm
16.5 mm
2 m
12mm
tap fitting
58.3045
30 m
Extreme Ultraflex
Reinforced
Max. 150 p.s.i.
(10 BAR)
10.5 mm
16.5 mm
2 m
12mm
tap fitting
MAINTENANCE
• Always keep the hose clean.
• If the hose becomes dirty, clean it with
a damp cloth while retracting.
• DO NOT twist the hose while in use.
• Mount the hose reel in a sheltered area to
assist and protect the performance of the
hose and hose reel.
• DO NOT allow the hose to contact any
corrosive chemicals or fluids.
• Always retract the hose when not in use.
• The Jamec Pem PRO:X Hose Reel contains
a pre-tensioned spring inside the inner drum
assembly.
Do not attempt to open the inner drum
assembly.
WARRANTY
& CLAIM PROCEDURE
The Jamec Pem PRO:X Hose Reel is covered
against defects in material and workmanship.
In the instance of a warranty claim, the owner
will be entitled to a replacement unit or a
sufficient repair of the defective part/s and
or component/s to ensure normal operating
condition of the hose reel.
WARRANTY EXCLUSIONS
The hose, rubber o-rings and hose stopper
are deemed normal wear items and are not
covered under warranty.
The warranty does not extend to parts or
components affected or damaged by
accident, normal wear, misuse, neglect or
faulty installation.
To register a warranty claim contact:
Companion Brands
Phone: 1300 555 197
Fax:
1300 555 198
E-mail: enquires@companionbrands.com.au
