6
Connections
Caution - All connections to the SoundBar amplifier must be made before you
connect to the main power.
ACCESSING THE AMPLIFIER CONNECTIONS
The amplifier connections can be accessed by removing the 4 screws on the front panel and tilting the
amplifier down on its hinge. The arrows below show the 4 screws to remove with your Phillips head
screwdriver (not included).
IR Sensor
Figure 1: Removing the 4 screws to access the connections.
1
4
3
6
8
5
S/N:
MODEL NO.: M102
HDMI ARC
OPTICAL
FCC ID: 2AUGD-M102
CAUTION:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
ATTENTION
TO REDUCE THE RISK OF FIRE REPLACE WITH
ONLY THE SAME TYPE AND RATING FUSE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOSTURE.
WARNING:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
SUB OUT
AUX IN
COAX
L
R
ON
AC 100-240V
50/60Hz 160W
STANDBY < 0.5W
Figure 2: Back of Amplifier with connections
7
2
Figure 3: Top View of SoundBar with Amplifier Secured in Place
S/N:
MODEL NO.: M102
HDMI ARC
OPTICAL
FCC ID: 2AUGD-M102
CAUTION:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
ATTENTION
TO REDUCE THE RISK OF FIRE REPLACE WITH
ONLY THE SAME TYPE AND RATING FUSE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOSTURE.
WARNING:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
SUB OUT
AUX IN
COAX
L
R
ON
AC 100-240V
50/60Hz 160W
STANDBY < 0.5W
