background image

Danger of electrical shock!  

Do not use while 

bathing. Never immerse the device or the power 

cord in water or other liquid.

Danger of electrical shock! 

 Never touch the power 

plug with wet hands, especially when inserting or 

removing the plug.

Danger of electrical shock! 

 If the unit has fallen into 

water during operation, do not touch the unit. Remove 

the power plug from the socket first.

Danger of electrical shock! 

  Do not spray water or 

liquid over the device.

• 

Never operate the device unattended.

• 

Follow the manual to operate the device.

• 

Do not use components unapproved by the 

manufacturer.

• 

When removing the power cord from the socket, grab 

the power plug not the cord.

• 

To protect the power cord from damage, do not cause it 

to get caught by things such as cupboard door or a chair 

leg; do not drag across a hot surface.

• 

If there is damage to the power plug, cord, housing, or 

other parts of the device, do not use the device.

• 

Do not disassemble the device, except by professionals.

• 

If the unit is damaged, non-operational or has fallen into 

water, take it to a qualified service provider.

• 

Remove the power plug from the socket:

  -if malfunction occurs

  -before cleaning the device

  -if the device is not being used for prolonged period

  -after each use (recommended)

• 

The installation of an earth leakage circuit breaker 

with a rated tripping current of no more than 30 mA 

provides further protection against an electrical shock. 

The installation should only be carried out by a trained 

electrician.

  

To prevent fire hazards, please observe the  

        

following:

• 

Never block the vents on the device. Keep the vents 

free from lint, hair and other materials.

• 

Do not place the device on a soft surface, such as a bed 

or a couch, where the vents could be blocked.

• 

Observe the warnings in all sections.

• 

If the supply cord is damaged, it must be replaced 

by the manufacturer or its service agent or a similarly 

qualified person in order to avoid a hazard.

SAFETY PRECAUTIONS

Keep it away from children!
This appliance can be used by children aged from 8 years and above if they have been given 

supervision or instruction concerning use of the appliance in a safe way and if they understand 

the hazards involved. Cleaning and user maintenance shall not be made by children unless they 

are aged 8 years and above and supervised. Keep the appliance and its cord out of reach of 

children aged less than 8 years.

• 

Please store the ultrasonic cleaner where it is inaccessible by children.

• 

Danger to children! Danger for death through suffocation! Keep packaging material away from children.

• 

This appliance should not be used by children. Keep the appliance and its cord out of reach of children.

To prevent life-threatening electrical shock, please observe the following:

4

Risk of fire and explosion!

• 

Never use flammable liquids or solvents directly in the 

ultrasonic cleaning bath. Alcohol, acids and solvents 

should be used in an In-direct tank.

• 

Ultrasonic activity increases the vaporisation of liquids 

and creates a very fine mist which can catch fire.

Caution!

• 

Avoid any acetone, acid, alcohol, amonia or solvents 

from contacting the plastic housing and control panel 

to prevent corrosion. Use Indirect Cleaning and a 

glass or metal container for using such solutions.

Risk of damage to the ultrasonic tank!

• 

Do not use any acid cleaning agents (pH value < 7) 

directly in the stainless steel tank if the cleaning items 

or the contamination of the cleaning items contain 

halogenides (fluorides, chlorides or bromides). The 

same applies to NaCl solutions.

• 

The stainless steel tank can be destroyed by crevice 

corrosion in a very short time. 

Substances that cause 

crevice corrosion can be contained in household 

cleaners.

CAUTION

Summary of Contents for 9050 Touch

















Reviews: