8
NEVER OPERATE THE UNIT WITHOUT WATER IN THE CLEANING TANK
- DAMAGE MAY OCCUR
NEVER USE BOILING WATER - DAMAGE MAY OCCUR
DIFFERENT WAYS OF CLEANING
HOW DO I USE THE ULTRA 8050D-H CLEANER
EXTENSIVE CLEANING
If the item needs extensive cleaning or sterilising,
then then first using the enhanced cleaning effect
of heating the water can have amazing effects.
This should be followed by adding a few drops of
washing up liquid or liquid soap to the tank and
repeating the cleaning procedure as described in
ENHANCED CLEANING.
Care should always be taken to ensure when
putting multiple items in the cleaner they are not
rubbing against each other as this can cause
scratches or damage to the items.
A final cleaning cycle using plain water is recommended after using soaps or
detergents to clean any remaining residue from the items being cleaned.
Note: The water should be changed between cycles if it becomes dirty. Always
ensure the unit is unplugged when changing water.
When emptying, always pour liquid away via the back, avoiding the ventilation
slots / power inlet on the sides and control panel on the front face.
3
CLEANING LARGE ITEMS
If the item is too large to fit completely in the tank, then you can use the ultrasonic
cleaner with the item to be cleaned part immersed, with the lid open. Ensure the
"MAX" marking is not exceeded when immersing the item.
IMPORTANT NOTES
1. Care should be taken when using different types of cleaning soaps or
detergents. Always ensure they are suitable for the item you are cleaning. If in
doubt, please ask James Products Ltd or check www.jpl.uk.com
2. The Cleaning tray absorbs approximately 20% of the ultrasonic cleaning
ability of the cleaner. If the item will not be damaged, then the tray can be
omitted for a stronger clean.
3. The use of SOLVENTS or ALCOHOL in the tank or on any part of the cleaner
will damage your ultrasonic cleaner and void any warranty.
Summary of Contents for Ultra 8050D-H
Page 1: ...USER GUIDE...