James ULTRA 9020, User Manual

15

Select one of the 4 cleaning methods recommended earlier.

a.

 When the heater is needed, press TEMP button to select 

one of the 5 preset temperatures. Press Heater button,  

 flashes, indicating the heater is turned on. When the 

water reaches the set temperature,   dims, indicating 

the heater is turned off.

To ensure safety, the unit is designed with dual 

protections. The heater will be turned off automatically  

if it has been running for 50 minutes.

Thermometer lights 

up to indicate the 

percentage of the set 

temperature reached.

30~60%

90~100%

0~30%

60~90%

b. 

If solution is added, to speed up the mixing and to use less solution, use degas function.  

Press TIME button to set the timer to 10 minutes then press Function button, 

illuminates. 

Press On/Off to start degassing. It changes over to normal cleaning automatically after 90 seconds.

c.

 When debris “smoke” is no longer visible, cleaning is done. If additional cleaning is needed, reset the timer 

and repeat the steps above.

When cleaning is completed, switch off the power, open the 

lid and retrieve the basket and the items.
Alternatively, raise and suspend the basket above water 

as illustrated in the Usage Guide for Accessories section to 

drain water.
Connect the hose to the drainage pipe as shown.
Open the drainage valve to drain the dirty water.
Clean and wipe the tank dry.
Close the drainage valve.

4

5