Jamesway Incubator Company
Part Name / Description:
Platinum 2.0 Center ECU Support
Instruction #:
JIC-INSTP2-00004
Page
13
of
17
Operation Instruction Title:
Platinum Centre ECU Support
Revision Date: 04/03/2018
Revised By: V. Frail
Revision No. A
Approved By: S. Ditner
Page
13
of
17
JIC-INSTP2-00004 Step 41
Secure the intake assembly to the frame
and intake duct with P6401 bolts and
O490500 nuts, with the nuts inside the
intake duct.
JIC-INSTP2-00004 Step 42
Silicone around the assembly and roof
joint both inside and outside the cabinet.
JIC-INSTP2-00004 Step 43
The centre support requires the
installation of two magnetic catches on
each intake duct (4 in total).
Insert the catch through the slot in the
duct. Push the shim on the back gently
until it snaps into place.
JIC-INSTP2-00004 Step 44
Attach the PB5646 lift-off hinges to the
duct covers and intake ducts using PA130
washers and PT1191 panhead screws.
The male portion should be installed on
the door, and the female portion on the
duct.
The hinge pin should face downwards and
be attached to the duct cover.
