Jamesway Incubator Company
Part Name / Description:
Platinum 2.0 Center ECU Support
Instruction #:
JIC-INSTP2-00004
Page
14
of
17
Operation Instruction Title:
Platinum Centre ECU Support
Revision Date: 04/03/2018
Revised By: V. Frail
Revision No. A
Approved By: S. Ditner
Page
14
of
17
JIC-INSTP2-00004 Step 45
Connect the duct covers on each side and
close.
Damper Motor Installation
JIC-INSTP2-00004 Step 46
Attach the damper motor and mount as in
OP100027 Exhaust Dampers procedure.
JIC-INSTP2-00004 Step 47
The intake dampers will be wired once the
exhaust dampers are in place.
Proceed to finishing the cabinet with the
add-ons, exhaust dampers, airlines, etc. or
installing the Pilot system plug bar.
Pilot Plug Bar Installation
Refer to F3211 Platinum Egg Plug Install for additional details.
JIC-INSTP2-00004 Step 48
Screw a PB4529 liquid tight into the top of
the MB20332 duct for the Pilot
connections.
JIC-INSTP2-00004 Step 49
Locate the duct on the left side of the
center ECU support. It should be tight to
the top with the liquid tight pointing
towards the center of the cabinet.
