Jamesway Incubator Company
Part Name / Description:
Platinum 2.0 Center ECU Support
Instruction #:
JIC-INSTP2-00004
Page
2
of
17
Operation Instruction Title:
Platinum Centre ECU Support
Revision Date: 04/03/2018
Revised By: V. Frail
Revision No. A
Approved By: S. Ditner
Page
2
of
17
JIC-INSTP2-00004 Step 3
Fit the support legs (MB20006 RH and
MB20007 LH) to the AB7419 ECU center
support assembly.
The shorter side from the gap should be
on the long side (without the shelf) of the
main support piece.
Ensure the nut plate is centered in the
opening of the
JIC-INSTP2-00004 Step 4
Stack a P6255 nut, then P6317 lock
washer, then a P6286 flat washer onto the
PB5756 articulated foot.
Screw PB5756 into each support leg,
about half way.
JIC-INSTP2-00004 Step 5
Secure each support leg to the frame
using 7x P6082 self-drilling screws.
Pre-
drill the holes using a 5/32” drill bit.
Drill
5/32” drill bit
#2 Phillips driver
bit
