AI4100 Portable AEI Reader
47
March 2, 2015
5.10. Default Values Setup
To set up default values, tap the Default Values menu item under the Setup menu.
This will cause the Default Values dialog shown in Figure 49 to be displayed.
Figure 49 - Default Values Dialog
Default values for Vehicle Initial and track orientation can be entered into the system. The
default value for the Vehicle Initial is used when vehicle identification is manually entered into
the portable reader.
The Vehicle Initial can either be selected from a list of previously entered initials in the
Vehicle Initial field's pull down list (which appears when you tap on the down arrow located on
the right side of the Vehicle Initial field), or a new Vehicle Initial can be typed in. To enter a
new Vehicle Initial, tap on the keyboard icon located near the bottom right of the screen. This
will cause a keyboard to be displayed. Tap on the characters of the new initial.
After you have entered a new Vehicle Initial, the new Vehicle Initial will appear in the Vehicle
Initial's pull down list when this dialog is displayed again.
The default track orientation is used when track inventory is started and the track name is
entered.