Setting Up the XG3 Device
XG3
User Manual
Janam Technologies LLC
3
―
7
Key XG3 Device Option Settings—Device Password
(continued)
4. Tap the
down arrow
in the
Password type
box.
5. From the pull-down menu, select the type of password you would like to use –
Simple PIN (Personal Identification Number) or Strong alphanumeric. Enter the
password and enter in the same password again for confirmation.
Simple PIN
passwords contain only numeric characters and must be at least 4
characters in length. Overly simplistic sequences such as “1234, “1111”, etc. will
be rejected as unsafe.
Strong alphanumeric
passwords must include at least 7 characters, 3 of which must
be a combination of UPPERCASE and lowercase letters, numerals or punctuation.
Examples:
Upc4003
UPC?4003
To remove password protection:
1. Tap
Start
menu >
Settings
>
Personal
tab >
Lock
.
2. Enter your current password.
3. Un-check the
Prompt if device unused for
check box.
4. Tap
OK
.
Changing Passwords
Passwords may be changed by following the same procedure used to set the initial
password. However, the process will be interrupted with the password entry screen.
Entering the current password will enable continuation of the password change process.
Screen/Keyboard Locking & Unlocking
Note:
When the device is locked, neither the on-screen keyboard nor the physical
keypad will accept user input, preventing unintentional input. This level of
locking does not take the place of the added security of password protection.
To lock the device:
―
Tap the Lock (icon) on the Tile
Toolbar.
To unlock the device:
―
Slide the Unlock (bar) left or
right.
