XM2-RFID
User Manual
7-1
Janam Technologies LLC
7
Synchronizing the XM2-RFID Device
Microsoft® Windows Mobile Device Center and ActiveSync allow you to synchronize data between
an XM2-RFID and a PC. ActiveSync and Windows Mobile Device Center share some similarities.
This User Guide includes setup for Windows Mobile Device Center. If you need additional
assistance, please contact the JanamCare Service and Support Center.
Creating a User Profile
To create a user profile:
1.
Tap
Start
menu >
Settings
>
Personal
tab.
2.
Choose
Owner Information
.
3.
Enter
identification
,
notes
and
display
information.
4.
Check the Identification information check box only if you prefer Owner Information to
be the first screen to appear at startup.
5.
Tap
OK
to save changes.
Managing Partnerships
A partnership enables you to automatically synchronize selected XM2-RFID files at startup when all
synchronization conditions are met (see Note below). Alternatively, you can run synchronization
manually (on command), copying only the files you want to sync.
To set up a partnership to automatically sync files:
1.
Connect your XM2-RFID to your PC and power the XM2-RFID on.
a.
Note:
Synchronization requires a direct connection between the XM2-RFID and
the host PC, using a USB sync cradle.
2.
On your PC, select
Start
>
Programs
>
Windows Mobile Device Center
.
3.
At the
Microsoft Mobile Device Center Home screen
(on your PC), click
Set up your
device
.
4.
The
Set Up Windows Mobile Partnership
window will appear. Select the data types
that you want to synchronize and tap
Next
.
5.
The
Set Up Windows Mobile Partnership (Device name)
window will appear. Use
the default name or enter a new name.
6.
Tap
Set Up
to proceed. Set Up will start, followed by synchronization between the PC
and the XM2-RFID.
7.
The
Windows Mobile Device Center screen
on your PC will indicate synchronization
progress.
To add/remove files to/from the device:
1.
Select (mouse over)
Mobile Device Settings
>
Change content sync settings
on the
PC’s Windows Mobile screen.
