XM66 User Guide
4-1
Janam Technologies LLC
4
Reset the XM66
To soft reset:
In most situations, a soft reset restarts the device and saves all stored
records and entries. However, any data that has not been saved will be lost
during a soft reset. To perform a soft reset, do the following:
1. Remove
the
battery door from the back of the unit.
2. Locate
the
reset button.
3. Using the stylus, press the reset button (one time).
4. Replace
the
battery door.
To hard reset:
A hard reset returns the XM66 to factory settings, removing ALL
applications and data from the device. Be sure that all data is backed up
before performing a hard reset.
To perform a hard reset, do the following:
1. Remove
the
battery door from the back of the unit.
2. Locate
the
reset button.
3. While holding the arrow-up key located on the keypad, use the stylus to press
the reset button (once). Continue to hold the arrow-up key.
4. After the reset has occurred and the calibration screen appears on the screen,
release the arrow-up key.
Blue Key
F
EATURED
S
HORTCUT
:
(Numeric
Keypad)
Simultaneously
press
the
blue
key
and
the
power
button
and
hold
for
five
seconds.
When
the
Janam
logo
appears
on
the
display,
release
both
the
blue
key
and
the
power
button.
Power
F
EATURED
S
HORTCUT
:
(Numeric
Keypad)
Simultaneously
press
the
yellow
key
and
the
power
button
and
hold
for
five
seconds.
When
the
Janam
logo
appears
on
the
display,
release
both
the
yellow
key
and
the
power
button.
Perform
touch
‐
screen
calibration.
Power
Yellow Key
