XP20 User Manual
13-3
Janam Technologies LLC
RF, regulatory and safety approvals
Parameter Specification
R&TTE
Australia
EN 300 328 v1.6.1 (2004-11)
EN 301 489-1 v1.6.1 (2005-09)
EN 301 489-17 v1.2.1 (2002-08)
EN 60950-1:2001+A11
EN 50371:2002
AS/NZS CISPR 22:2004
This product is marked with
in accordance with the Class II product requirements specified in the
R&TTE Directive, 1005/5/EC. The equipment is intended for use throughout the European Community. Its
authorization for use in France is restricted as follows.
PAN European Frequency Range: 2.402-2.480 GHz
Restrictions in France:
Indoor use:
Maximum power (EIRP*) of 100 mW for the 2400-2483.5 MHz band.
Outdoor use:
Maximum power (EIRP*) of 100 mW for the 2400-2454 MHz band and maximum
power (EIRP*) of 10 mW for the 2454-2483 MHz band.
Pacemakers, hearing aids and other electrically powered devices
Most manufacturers of medical devices adhere to the IEC 601-1-2 standard. This standard requires
devices to operate properly in an EM Field with strength of 3V/m over a frequency range of 26 to
1000MHz.
The maximum allowable field strength emitted by the XP20 is 0.3V/m according to Subpart B of Part 1 of
the FCC rules. Therefore, the XP Series has no effect on medical devices that meet the IEC specification.
Microwaves. The radio in the XP Series terminal operates on the same frequency band as a microwave
oven. Therefore, if you use a microwave within range of the XP20 you may notice performance
degradation in your wireless network. However, both your microwave and your wireless network will
continue to function. The XP Series batch devices do not contain a radio, and therefore, are not affected
by microwave ovens.
Care and cleaning of terminals
When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free
cloth. The terminal can be cleaned with a damp cloth.
For European Community users
Janam Technologies complies with Directive 2002/69/EC of THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL OF 27 January 2003 on waste electrical and electronic equipment (WEEE).
Waste electrical and electronic equipment (WEEE) information
This product has required the extraction and use of natural resources for its production. It may contain
hazardous substances that could impact health and the environment if not properly disposed.
In order to avoid the dissemination of those substances in our environment and to diminish the pressure
on the natural resources, we encourage you to use the appropriate take-back systems for product
disposal. Those systems will reuse or recycle most of the materials of the product you are disposing in a
sound way.
