Setting Up the XT1 Mini-Tablet
XT1
User Manual
Janam Technologies LLC
Version 1, March 2015
3
―
1
3
Setting Up the XT1 Mini-tablet
Removable Memory
IMPORTANT NOTE!
To avoid possible damage to microSD and/or SIM cards or the XT1, ESD
(electrostatic discharge) precautions are recommended when installing or
removing
microSD and/or SIM cards. At a minimum before handling, discharge
any personal static electric buildup to a point of discharge other than the device.
microSD Card
About microSD Cards
The XT1 mini-tablet features a microSD flash memory card slot that
is compatible with microSD memory cards with a storage capacity of
up to (but not more than) 64GB (FAT32 file format). When inserted,
a microSD card provides additional memory storage that is
designated by the XT1’s
File Manager
tool as “
MicroSD card
” and
by its nature is
external storage
. Removable microSD memory is
useful for general file storage, uploading and downloading of user
data and more. The use of high quality microSD cards supplied by a
reputable manufacturer is recommended.
To access the microSD card slot:
1.
Locate and carefully open the slot cover marked with a
microSD memory card icon at the lower left-hand edge of the
mini-tablet (Figure 1). With the mini-tablet’s back facing up
and using the microSD card slot cover’s thumbnail cutaway,
apply gentle outward pressure in a straight line away from
the mini-tablet body. APPLY ONLY ENOUGH PRESSURE TO
RELEASE THE PORT COVER, ALLOWING IT TO REMAIN
TETHERED TO THE MINI-TABLET BODY!
To install a microSD card:
2.
With the mini-tablet’s back still facing up (toward you), orientate a
compatible microSD card with its straight edge down (towards the
bottom edge of the mini-tablet) and its b
rand and capacity markings
facing toward you (Figure 2).
3.
Insert the microSD memory card fully until it locks in the slot. DO NOT
attempt to insert the microSD card in any other orientation.
4.
Replace the tethered microSD slot cover.
Straight edge
Figure 2
microSD
card slot
microSD card
card
slot cover
Figure 1
