Setting Up the XT1 Mini-Tablet
XT1
User Manual
Janam Technologies LLC
Version 1, March 2015
3
―
3
Backup and Reset
Use
Backup and Reset
for device recovery and as a convenient means of rapidly deploying additional
similarly configured XT1 mini-tablets.
Once a microSD card-equipped XT1 mini-tablet has been configured as preferred, its settings and
other important data are easily backed up to the microSD card with the
Backup
function. The
Reset
function uses the backup information (data and settings) to restore a damaged or corrupted
XT1 to a previous state. The
Reset
function is also a means of quickly and accurately cloning a
custom-configured XT1 mini-tablet. After being cloned with the
Reset
function, each cloned XT1 will
be configured identically to the host device whose settings were backed up on its microSD card.
Thus, it is easy to configure multiple matching devices for deployment.
IMPORTANT NOTE!
XT1 Backup and Reset functions require the installation of a microSD card. Refer
to page 1 of this chapter for more about microSD cards.
To Backup the XT1:
1.
Connect the XT1 to an AC power source and confirm that the XT1 battery is charged to
at least
60%.
2.
From the
Home
screen, touch the
Settings
(icon) (Figure 6).
3.
Touch
Settings
screen to scroll down until
Backup & reset
is in view (Figure 7).
4.
Touch
Back up system
(Figure 8).
⎯
The
System Backup Fail
message will appear unless a microSD card is installed.
5.
Agree
to begin (or cancel) the Backup procedure.
⎯
The Backup will begin and the device will be restarted, during which time, the backup
process will be confirmed visually.
Figure 6
Figure 7
Figure 8
