Setting Up the XT1 Mini-Tablet
XT1
User Manual
Janam Technologies LLC
Version 1, March 2015
3
―
5
Cradle kits
Janam offers single-slot and six-slot docking cradle kits which provide a quick and convenient means
of charging and storing XT1 mini-tablets. Both feature Ethernet and USB connectivity*.
XT1 mini-tablets interface with cradle kits via the mini-tablet’s
multi-pin dock connector centered on the top edge of the
mini-tablet (Figure 10).
* Refer to
Notes
on following page.
Cradle Kit Hardware Overview
1.
Device slots
⎯
One or Six,
depending on cradle configuration
(Figure 11).
2.
Kensington lock
(Figure 12).
3.
Power jack
(Figure 12).
4.
Ethernet port
(RJ-45-type)
(Figure 12).
5.
USB port
(for left front slot only
of six-slot cradle)
(Figure 12).
To connect cradle kit to AC power
1.
Plug the female end of the AC cord into the
brick-type power supply (Figure 13).
2.
Plug the power supply’s right-angle mini-
barrel plug
into the cradle.
3.
Plug the 3-prong AC plug
into a suitable
110-120-volt AC outlet. Use only easily
accessible wall outlets that are well within
reach of the length of supplied power cable.
XT1 dock connector
Figure 10
Figure 11
Figure 12
Figure 13
