XT2+ Setup
XT2+
User Manual
Janam Technologies LLC Version 2, March 2019
XT2+ Setup 3—2
SIM Cards
About SIM Cards
SIM (Subscriber Identity Module) cards are needed to add cellular voice and/or data communication
service to devices equipped for cellular signal functionality. SIM cards can be transferred between
devices supporting the same communications standards.
Janam XT2+ models equipped with optional WWAN (Wireless Wide Area
Network) cellular signal functionality include a removable SIM card slot. Neither
cellular signal connectivity for internet access nor optional 3rd party voice
telephone applications can function without an activated SIM card installed.
The XT2+ SIM card slot is designed for use with a
standard SIM card
. If a SIM card provided by
your cellular carrier uses the micro or nano format, you need a (readily available) SIM card adapter
to use it in the XT2+. Contact Janam or your local GSM/GPRS based carrier for more information
about SIM cards and wireless service.
To access the SIM card slot:
Remove the battery compartment cover on the back of the unit by sliding the spring-loaded cover
lock to the left, holding it in that position, and then gently pulling the
cover up by the two tabs on the left and right of the cover. Remove
the XT2+ battery by pulling on the black plastic tab until the battery
pops out.
To install a SIM card:
The location of the SIM card slot in the battery compartment is shown
in the illustration to the right. Orientate a compatible SIM card (or
micro or nano SIM card in a standard SIM adapter) with its straight
edge facing into the slot and its golden contacts surface facing down.
Carefully insert the SIM card fully into slot.
NEVER attempt to insert a SIM card in any other orientation or force a
SIM card into its slot.
Once the SIM card is installed, replace the battery and carefully put
the battery compartment cover back on.
standard micro nano
USB Port
The Janam XT2+ provides USB connectivity through its
Direct Sync I/O Connector
at the bottom
of the device. An optional USB Sync cable is required. Wired USB connectivity is also possible through
the optional Single-Slot Cradle.