Barcode Scanning
XT2+
User Manual
Janam Technologies LLC Version 2, March 2019
Barcode Scanning 9—3
Options
Settings
>
Scan Settings
>
Options
sets:
Enable center window
— Limits decoding to
codes inside the center window. Center window
tolerance goes from 0 (no tolerance) to 100
(most tolerance).
Decode Mode
— Can be “Standard” or “Quick
Omni”.
Delay before decoding
— Set delay in 1/10th
second increments, from 0 to 1 second.
Inverse 1D Mode
— Set to read regular codes
only, inverse codes only, or auto-detect.
Power save mode
— Toggles on and off.
Power save timeout
— Timeout can be set
from to 65535 seconds.
Enable aimer
— Turns the red aimer on or off.
Enable illumination
— Turns the white
illumination of the scan area on or off.
Note that these settings can have great
influence on both scan speed and scan decoding
accuracy. For detailed technical information on
the impact of redundancy, security and quiet
zone levels, as well as other scan-related
settings, please contact JanamCare.