XT200 Setup
XT200
User Manual
Janam Technologies LLC Version 2, April 2020
XT200 Setup 3—1
XT200 Setup
3
Removable Memory
IMPORTANT NOTE!
To avoid possible damage to microSD and/or SIM cards or the XT200 itself, ESD
(electrostatic discharge) precautions are recommended when installing or removing
microSD and/or SIM cards. Before handling, discharge any personal static electric
buildup to a point of discharge other than the device.
microSD Card
About microSD Cards
The XT200 rugged touch computer has a microSD flash memory card slot in its battery compartment
that is compatible with microSD memory storage cards with a capacity of up to 256GB. When inserted,
a microSD card provides additional memory storage that is designated by the XT200’s File Manager
tool as “MicroSD card” and by its nature is external storage. Removable microSD memory is useful
for general file storage, uploading and downloading of user data, and more. The use of high-quality
microSD cards supplied by a reputable manufacturer is recommended.
To access the microSD card slot:
Remove the battery compartment cover on the back of the unit by firmly depressing the battery
locker button marked PUSH, holding it in that position, and then slowly
and carefully prying open the battery compartment cover. Then remove
the XT200 battery.
To install the microSD card:
Locate the microSD card slot in the battery compartment. Lift up the
rubber flap. Place a compatible microSD card with its straight edge
down (towards the bottom edge of the XT200) and its brand and
capacity markings facing toward you. Fully insert the microSD card. DO
NOT attempt to insert the microSD card in any other orientation. Put
the battery back into its compartment and put the battery compartment
cover back on.
To remove the microSD card:
Before removing a microSD card, tap
Settings
>
System
>
Storage
.
Tap the
triangular eject icon
to properly unmount the card. This keeps
data safe. Then remove the battery compartment cover and remove the
battery. Gently remove the microSD card.
