Important requirements
The MFG requires that you contact your local, licensed plumber and licensed electrician to install your new spa. Installation MUST
be in compliance with all local and state building codes. Your pedicure spa can not operate efficiently or safely unless it is provided
with adequate electrical power, sufficient water pressure, proper water temperature, and required drainage capabilities. Contact your
local building inspector for information and local code compliance procedure that need to be followed when having your new pedicure
spa installed. Subsequent inspections and approvals that may be required are the responsibility of the purchaser.
Thank you for choosing GX series , This finest Whirlpool Pedicure Spa has been develop and Manufactured by
J&A USA Inc., to bring quality and exquisitely balanced design yet afford-ability and dependability when properly use.
Please read this entire manual thoroughly before installation and use
Precaution
-
Do not stand in the basin of the spa.
-
Excessive water temperature is dangerous and should be checked before use. Maximum water Temperature should not exceed
100F
(38C).
-
Always enter and exit the spa slowly and carefully.
-
Never bring or operate any electrical device near pedicure spa.
-
The unit has a weight capacity of 250 pounds.
Health Warning
Individuals whose feet or legs are inflamed or have open wounds should not be allowed to use the pedicure spa at any time. The
technician should advise clients to consult their physician before using the spa if there is any sign of fungal infection, swelling,
fracture, or persistent pain. In some cases diabetics may experience improved circulation in their feet, but should first consult their
physician prior to receiving a pedicure.
If the client experiences any pain or discomfort, discontinue the use of the pedicure spa
immediately.
Shipment Inspection
Examine the components immediately upon arrival to make sure no damages to the pedicure spa base and chair during the shipment. It
is very important that you notify the driver directly
and
notation
should
be on the face of the freight bill or bill of lading of any
damage. Failure to note damage on the bill of lading may prevent any claims you may have against the carrier.
If concealed or damage is found, you MUST notify the carrier at once and request an inspection.
DO NOT DISCARD THE
SHIPPING CARTON
If
receiver
sign
the
carrier
clean
receipt
of
goods
that
have
been
damaged
in
transit
.
D
o so at your own risk
and expense.
PLEASE
TAKE
TIME
TO
READ
THIS
MANUAL
THOROUGHLY
BEFORE
USE
.
If
you
have
any
questions
or
concerning
with
our
pedicure
spa
,
Please
contact
our
customer
service
and
technical
support
at
631-243-3336 ext 121
,
Monday
through
Friday
9AM
-
5PM
or
us
at
www.info@jausainc.com
LEONX
Summary of Contents for Lenox GX
Page 19: ......