Installation Specifications Summary
Warning:
Failure to comply with federal, state or local codes and ordinances will result in warranty being null and void.
As stated, the pedicure spa installation must comply with all plumbing and electrical codes. A licensed plumber and
licensed electrician must complete the applicable connections of the pedicure spa.
Location and support
Select a level location. The floor structure beneath the pedicure spa must be capable of supporting the occupied pedicure
spa.
For the seat back to fully recline, the pedicure spa base must be mounted as follow from the wall as shown below:
*** When chair slide all the way back – would require 20 inches from the wall***
*** When chair slide in the middle – would require 15 inches from the wall***
*** When chair slide all the way to the front – would require 12 inches from the wall***
Above measurement are based on with back cushion is all the way reclined
Due to continuous improvements on all our products, specification, characteristics, packing, color, designs are subject to
change without notice.
See Detailed info
on top of the page
Summary of Contents for Lenox GX
Page 19: ......
