11
FOR SANIJET® -PIPELESS SYSTEM USERS ONLY
Maintenance
Keep the screen of the jet inlet free of debris, any blockage of the screen reduces the whirlpool
action and may cause damage to the jet motor.
Cleaning Pipeless Jet System
Remove the jet assembly from its casing: Rotate the jet assembly counterclockwise and pull outward.
Remove the impeller cap: rotate the impeller cap clockwise (OFF) and life outward.
Remove impeller.
Clean the components. After each jet is disassembled, the jet parts and jet casings can be cleaned
by hand. Jet parts may be cleaned in your dishwasher by placing them in the top rack away from
any heating element. Excessive heat (over 170i/EF) can damage the plastic parts. Jet casing can be
easily cleaned with a non-abrasive anti-bacterial cleaner when cleaning the tub shell.
Warning
DO NOT use if you are diabetic, have poor blood circulation, or if any area of your feet or leg is
inflamed or has open wound. Please consult your physician before using, if you have any kind of
fungal infection/s, swelling, fracture or persistent pain.
Assembly of the jet and maintenance
Disassembly
1)
Prior to removing the jet assembly, turn off the power
2)
Remove the jet assembly from its casing: Rotate the jet assembly counterclockwise and pull
outward.
3)
Remove the impeller cap: Rotate the impeller cap clockwise (OFF) and lift outward.
4)
Remove the impeller
Assembly
1)
Place impeller on a jet assembly
2)
Place the impeller cap: Rotate the impeller cap counterclockwise.
3)
Place the jet assembly to its casing: Rotate the jet assembly clockwise and push inward.
