![background image](http://html1.mh-extra.com/html/jandj-electronics/colorsplash-xg-lpl-f2c-series/colorsplash-xg-lpl-f2c-series_installation-and-operation-manual_3075477007.webp)
11
12
Show:
Cross-fade through orange, red and magenta.
Cycle:
24 second color sequence cycle with cross-fade between colors.
6. DESERT SKIES:
Show:
Cross-fade transition through all five solid colors.
Cycle:
2 second color sequence cycle with fast change between colors.
7. NOVA:
8. PARISIAN BLUE:
Fixed Color
9. NEW ZEALAND GREEN:
Fixed Color
10. BRAZILIAN RED:
Fixed Color
11. ARCTIC WHITE:
Fixed Color
12. MIAMI PINK:
Fixed Color
13. COLOR LOCK:
Lock and save the current color effect during a color show.
14. RETURN:
Return to the last saved color effect.
Show:
Rapid cross-fades between white, magenta, blue and green.
Cycle:
16 second color sequence cycle through with rapid cross-fade between colors
Fixture will stay on each solid color for 4 seconds before moving to the next.
Show:
Rapid and random flashes through all five solid colors.
Cycle:
1/2 second color sequence cycle with fast change between colors.
1. PERUVIAN PARADISE (FACTORY DEFAULT LIGHT SHOW):
2. SUPER NOVA:
Show:
Slow cross-fade through all five solid colors.
Cycle:
Two minute color sequence cycle with slow cross-fade between colors. Fixture will
hold on each solid color for 8 seconds before moving to the next.
3. NORTHERN LIGHTS:
DESCRIPTION OF LIGHT SHOWS AND COLORS
Show:
Slow cross-fade between green and blue.
Cycle:
24 second color sequence cycle with slow cross-fade between solid colors.
Show:
Cross-fade through red, white and blue only.
Cycle:
11 second color sequence cycle with quick cross-fade between colors. Fixture will
stay on each solid color for 3 seconds before moving to the next.
4. TIDAL WAVE:
5. PATRIOT DREAM:
MEMORY MODE
When your ColorSplash XG light fixtures are turned off for longer than 10 seconds, the
light show or solid color on display will be stored. The next time the power is turned on,
the fixture will display that saved memory light show or color.
NOTE:
Your ColorSplash XG light fixtures are “synchronous”, meaning that multiple ColorSplash XG
light Fixtures on the same light will sync together so that they all display the same light show or solid
color at the same time. However, all of the XG light fixtures must be on the same electrical circuit
for this feature to be operational. ColorSplash XG LED light fixtures may not synchronize with any
other pool/spa light fixtures. ColorSplash XG LED light fixtures will synchronize with the LXG Series
replacement lamps. Please consult a qualified electrician to determine your specific pool and spa
circuit configuration.
TROUBLESHOOTING
Problem Reason/Cause
The light fixture will
not illuminate.
Light fixture does not
function properly.
Check the GFCI ground fault wiring and reset the GFCI if
necessary.
Check the fixture wiring connection to the junction box at the
pool side and the AC power switch. Be sure that there is proper
AC power applied to the fixture.
WARNING
Certain Pentair
®
and Jandy
®
automation systems have a mode setting for controlling “Pentair
IntelliBrite
®
5g LED Color” light fixtures. This setting can also be used to operate Color
Splash XG Series LED light fixtures. When the Pentair and Jandy automation system is set
to “IntelliBrite” mode, users will
NOT
see XG series proprietary colors and show names
displayed on the control screen.
(See J&J’s cross reference guide to assist users with selecting XG
Series light shows and colors on automation systems set to “IntelliBrite” mode.)
ColorSplash XG Series LED light fixtures will work with most pool/spa automation systems. NOTE:
If the automation system does not have a mode setting for Pentair IntelliBrite LED; XG series will
need to be controlled via the traditional on/off sequence to advance colors and light shows.
Please refer to the Pentair or Jandy automation manufacturer’s product user guide to
determine if the system has a mode setting for Pentair IntelliBrite 5g LED Color and for
information on how to set it up. J&J Electronics does not provide service or informational
support for Pentair or Jandy automation products.
NOTE: J&J’s ColorSplash XG Series LED Pool and Spa light fixtures will not
synchronize with any other manufacturer’s pool or spa light fixtures.
COLORSPLASH XG SERIES LED ENHANCED FUNCTIONALITY WITH CERTAIN
PENTAIR
®
AND JANDY
®
AUTOMATION SYSTEMS.
Summary of Contents for ColorSplash XG LPL-F2C Series
Page 17: ...30 31 NOTES NOTA NOTES NOTA...